From: Fredmoreno@aol.com
Message-ID: <6cdcbd04.24a32304@aol.com>
Date: Thu, 24 Jun 1999 01:58:28 EDT
Subject: Some landing/taxi lights
To: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
I was cruising a local speed shop and found some enclosed 12 volt light 
assemblies that look ideal for near wing tip (or other) installation.  I plan 
to remove the units I have and put these in.  No address or company name on 
the box, but it does have the following:

Pilot (trademark)  PL-4040C  12 V 55W H3 Halogen driving lamp.  

Dimensions of the enclosure is 3 9/16 wide by 2 3/16 high by 2 9/16 deep.  
The assembly includes a mounting foot making the total height 2 1/2 inches 
including the foot.  The housing is somewhat egg shaped, black with a clear 
lens.  The box comes with two light assemblies, harness, relay, pushbutton 
switch, and wiring instructions.  I prefer it to what I have already 
installed because I worry about water coming in around the acrylic lens on 
the wing leading edge.  These units are water tight as they are designed to 
mount on a bumper.  Check with your automotive sources and see if they can 
find them for you.  I got them at Speed Merchants in Santa Clara, CA

Fred
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html