Return-Path: <marv@lancaironline.net>
Received: from [65.33.166.62] (account marv@lancaironline.net)
  by logan.com (CommuniGate Pro WebUser 4.2.5)
  with HTTP id 571036 for lml@lancaironline.net; Fri, 17 Dec 2004 10:35:58 -0500
From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: Infinity grip mounting... ES
To: lml
X-Mailer: CommuniGate Pro WebUser Interface v.4.2.5
Date: Fri, 17 Dec 2004 10:35:58 -0500
Message-ID: <web-571036@logan.com>
In-Reply-To: <NGBBIBFOCLICMNMIEGDHMELADDAA.glong2@netzero.net>
References: <NGBBIBFOCLICMNMIEGDHMELADDAA.glong2@netzero.net>
X-Priority: 3
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"; format="flowed"
Content-Transfer-Encoding: 8bit




Posted for "glong2" <glong2@netzero.net>:

  Mark:
  I have an ES and did not cut the post down with the infinity grip. They seem
  to work ok, but do seem a bit long when doing a steep turn - however the
  extra moment arm is nice when they are long.
  
  Eugene Long
  Lancair Super ES
  glong2@netzero.net
  
   -----Original Message-----
   From: Lancair Mailing List [mailto:lml@lancaironline.net]On Behalf Of Mark
  R Steitle
   Sent: Thursday, December 16, 2004 9:14 AM
   To: Lancair Mailing List
   Subject: [LML]
  
  
   I was curious if any ES, or IVP builders found the need to shorten the
  control posts when using an Infinity grip?  Due to the many wires and
  switches, and required aluminum bushing, you can’t slip the grip all the way
  down over the control post.  Is it ok to cut it down?  If so, how much do I
  cut?
  
  
  
   Mark S.