Return-Path: <lancair.list-request@olsusa.com>
Received: from marvkaye.olsusa.com ([205.245.9.154]) by truman.olsusa.com
          (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35)
          with SMTP id com for <lancair.list@olsusa.com>;
          Mon, 21 Jun 1999 15:17:39 -0400
Message-Id: <3.0.3.32.19990621152235.008a5a60@olsusa.com>
Date: Mon, 21 Jun 1999 15:22:35 -0400
To: lancair.list@olsusa.com
From: Marvin Kaye <marvkaye@olsusa.com>
Subject: LNC2 pushrod travel dimesnions
X-Mailing-List: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Could one of you who have your LNC2 controls rigged take a couple of
dimensions for me, please?  I'm curious about the travel on the elevator
pushrod that runs from the stick to the idler arm (amount of fore/aft
travel to move the elevator from stop to stop) and the same dimension on
the aileron pushrods that connect to the aileron idler in the stub wing
(again linear dimension where the pushrod attaches to the stick to move the
ailerons from stop to stop.)  Your assistance will be greatly appreciated.
TIA

    <Marv>


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html