|
|
Posted for "Ron Raby" <ronr@advanceddesign.com>:
Bryan
We will see. I should be finished up with the paint shortly and will be able
to reassemble the plane and check. It seems to me, that in order to check
for twist you would have to make at least a couple of the wing jig
templates. I cannot believe that the aluminum jigs are not straight.
Ron Raby
ES # 160
I went through the Build shop in Feb 03. My wings were set in aluminum
laser cut jigs. Yours are in plywood. So, you may not have the twist
problem. Possibly it is in the aluminum set.
|
|