Return-Path: Sender: (Marvin Kaye) To: lml@lancaironline.net Date: Mon, 30 Aug 2004 14:40:15 -0400 Message-ID: X-Original-Return-Path: Received: from imo-d05.mx.aol.com ([205.188.157.37] verified) by logan.com (CommuniGate Pro SMTP 4.2) with ESMTP id 385133 for lml@lancaironline.net; Mon, 30 Aug 2004 14:20:57 -0400 Received-SPF: pass receiver=logan.com; client-ip=205.188.157.37; envelope-from=Newlan2dl@aol.com Received: from Newlan2dl@aol.com by imo-d05.mx.aol.com (mail_out_v37_r3.4.) id q.92.13acb6b9 (4539) for ; Mon, 30 Aug 2004 14:20:16 -0400 (EDT) From: Newlan2dl@aol.com X-Original-Message-ID: <92.13acb6b9.2e64c9e0@aol.com> X-Original-Date: Mon, 30 Aug 2004 14:20:16 EDT Subject: Re: [LML] Finishing techniques X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="-----------------------------1093890016" X-Mailer: 9.0 for Windows sub 5032 -------------------------------1093890016 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hi Gary For a thick buildup that will have to take some abuse, use milled fibers of glass or carbon mixed in epoxy. This is a LOT stronger than microballoons. You couls also build up the corner of the door with a lot of tape, laminate some fabric around the corner and squish inb so putty underneath. I wouldn't use BID though since you aren't getting continuous structural reinforcement. Use 0 degree/90 weave. Dan -------------------------------1093890016 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

Hi Gary

For a thick buildup that will have to take some abuse, use milled fiber= s of glass or carbon mixed in epoxy. This is a LOT stronger than micro= balloons. You couls also build up the corner of the door with a lot of= tape, laminate some fabric around the corner and squish inb so putty=20= underneath. I wouldn't use BID though since you aren't getting continu= ous structural reinforcement. Use 0 degree/90 weave.

Dan

-------------------------------1093890016--