Sender: <marv@lancaironline.net> (Marvin Kaye)
To: lml@lancaironline.net
Date: Sun, 09 May 2004 16:36:47 -0400
Message-ID: <redirect-3223415@logan.com>
From: "Matt Hapgood" <hapgoodm94@alum.darden.edu>
Subject: RE: [LML] Re: water and air vents
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Importance: Normal
In-Reply-To: <list-3222730@logan.com>

That would probably allow the water to run out, however it would also create
a miserable draft when I don't want fresh air...

Matt

-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net]On Behalf Of
Harry League
Sent: Sunday, May 09, 2004 8:24 AM
To: Lancair Mailing List
Subject: [LML] Re: water and air vents


Matt,

What if you determined the low points in your present setup and punched a
few
very small holes in the tubing's fabric in that area of the tubing.   The
idea
is that the standing water will not accumulate during the time it rains
because
it will just run out through the tiny holes.   Because they are so small,
the
hole will not interfere or reduce the flow to the cabin

Marvin Kaye wrote:

> Posted for "Matt Hapgood" <hapgoodm94@alum.darden.edu>:
>
> my ducting is 3/4".  Unfortunately, I didn't think to run the ducting off
> the TOP of the NACA.  Mine is run off the back and the bottom.  Makes for
a
> lot of water...
>
> Matt
>
> --
> For archives and unsub http://lancaironline.net/lists/lml/


--
For archives and unsub http://lancaironline.net/lists/lml/