From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: [FlyRotary] measurement needed
To: lml
Date: Mon, 26 Jan 2004 17:41:48 -0500
Message-ID: <web-2949889@logan.com>
In-Reply-To: <006e01c3e3cc$847af4f0$0000a398@Carol>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"; format="flowed"
Content-Transfer-Encoding: 8bit

Posted for "sqpilot@earthlink" <sqpilot@earthlink.net>:

   Hi, Rusty.....I just realized that you may be looking for some additional 
measurements.  If you do not consider the larger outside diameter of the 
thermostat itself, there is a secondary tee-pee shaped portion of the 
thermostat that sticks up into the housing. That measures 1.100 in diameter, 
and the total height of it is around .800 inches. This does not include any 
portion of the thermostat that is inserted into the relief groove in the water 
pump housing, and does not include the rubber seal or anything.  Just the 
smaller diameter portion of the thermsostat. Take care. Paul Conner