Posted for "Rudolf Winter" <winter@winsysteme.de>:

Hello Bob,

We had the same problem a few days ago in our 235. Mark the present
position of the high pressure switch! Then rotate to the left to lower
the shut-off pressure point. In our case about 45° were sufficient.
Check the gear function on jacks... Rudolf Winter
LNC235 99% LNC 4 <10%

 > > With the advent of cooler weather, the hydraulic pump in my LNC2
frequently wants to stay ON even after the gear is fully retracted.
Turning power off to the gear relays will stop the pump.  I believe that
a little adjustment to my high pressure switch should solve the problem.
Does anyone remember which direction of rotation will reduce the
shut-off pressure point and how much rotation is required to change it
by about 100 psi? Bob Jude N65BJ   < <