Re: BMA EFIS/One units in the
air
Just thought I'd
post this for all to read - It is a response from Harmon Lange as to how his BMA
EFIS is working. Harmon has been flying one of the original EFIS/One units
for about a year now...There is not a whole lot of info here except that it is
working fine. There are pictures of his RV and of his panel on the BMA
website. I'm sure he wouldn't mind entertaining questions on his
experiences with the Blue Mountain EFIS...His email is harmon@langair.com
******************************************************************************************************************************************
Dear Brian:
You haven't heard much from me because
I've been too busy flying. It will be one year next month that I first
flew the RV-8A, and the hobbs is at 212 hrs. Trip to Golden West, OSH. included.
The BMA EFIS/One is working just
fine. There was a glitch with the first version, but that was fixed after a few
hrs. I also had a cable come loose, but that was my fault. I have no info on how
many are actually flying. The one
thing that I need to address is that the system can not be on while cranking the
engine. This results in the engine running for a short time before I
get the oil pressure reading. An alternate source for this would be
good.
You can post this as needed.
Harmon
Lange