<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Subject: Re: LC20 attaching the stub wing skins

I recently attached the stub wing skins on my 360 and did it along
the lines of what Marv suggested.  I verified that the BL-50 and
tip ribs were level and fitted the stub wing skin, drilling cleco
holes at the root to hold it.  I also used the clark foam as per
the SB.  When the Hysol was applied I used pop rivets in all the
cleco holes and clamped the bottom bond line.  Sand bags were
used on the top to hold the bond line to the spar and BL-50 rib.
This all resulted in a very good fit on both stub skins.


Dan
L-360
olsen@eai.com