Mailing List lml@lancaironline.net Message #19575
From: glong2 <glong2@netzero.net>
Sender: Marvin Kaye <marv@lancaironline.net>
Subject: RE: [LML] ES Step
Date: Mon, 14 Jul 2003 07:59:58 -0400
To: <lml>
 Message Header

Undecoded Message
Bill:
I started mounting the step and found the same step height problem. I asked my wife to get in the plane with the step and because she has a bad knee, there is no way she could get into the plane even if I installed a handle. I have taken the step back out because I have to carry a ladder anyway. Why have the step if it cannot be used -  according to others it causes about a 2MPH drag.
 
Eugene Long
Lancair Super ES
glong2@netzero.net
-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net]On Behalf Of billcall@sbcglobal.net
Sent: Sunday, July 13, 2003 9:24 PM
To: Lancair Mailing List
Subject: [LML] ES Step

Hey, all you ES builders..How did you resolve the issue with the step finishing 24" off the ground?  This appears to be a result of the "taller" gear on the later kits vs. the factory plane.
 
Bill Call
N39WG ~70%
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster