|
Thanks to Jim for his informative response.
I'm particularly interested in any information that he or anyone may have
regarding the following modification(s) being referred to:
From Jim Hergert,
.... In fact the factory is coming out with a tail
stiffing mod. that adds about 2 inches to the leading edge of the vertical stab.
and a much bigger dorsel fin going forward to help strengthen the tail
torsorsonal resistance. It looks much better too. Just do a vertical Hit on the
tip of you Horz stab. and watch the shake. Then do this on the Tandem, you wil
see the difference and why they will probably require this on the
turbines.....
regards,
Joe Trepicone IVPT
|