Return-Path: Sender: (Marvin Kaye) To: lml Date: Wed, 04 Jun 2003 19:50:44 -0400 Message-ID: X-Original-Return-Path: Received: from gull.mail.pas.earthlink.net ([207.217.120.84] verified) by logan.com (CommuniGate Pro SMTP 4.1b7) with ESMTP id 2402545 for lml@lancaironline.net; Wed, 04 Jun 2003 19:10:02 -0400 Received: from sdn-ap-007watacop0177.dialsprint.net ([65.176.64.177] helo=f3g6s4) by gull.mail.pas.earthlink.net with smtp (Exim 3.33 #1) id 19NhOL-0000yJ-00 for lml@lancaironline.net; Wed, 04 Jun 2003 16:10:02 -0700 X-Original-Message-ID: <006001c32aee$f3e8a900$b140b041@f3g6s4> Reply-To: "Dan Schaefer" From: "Dan Schaefer" X-Original-To: "Lancair list" Subject: Flap position selector X-Original-Date: Wed, 4 Jun 2003 16:13:46 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 To all the listers requesting info regarding my flap positioner, I've located the drawings and will get them to Marv for posting in the next few days. I don't have the original files (sketches were done on a Mac in MacDraw and I haven't used a Mac for years) so I'm having to scan them into my PC. Since the pages have drawing and text, I will need to check for and correct the inevitable errors that that often creates. There are about three or four pages and I will need to add an explanation page separately since I made the sketches for myself and knew how I wanted it to go together. Incidentally, there is no electronics involved (which was a real stretch for an Electronics Engineer). The circuitry added to the standard toggle switch flap curcuit consists of one Auto/Manual select toggle switch and two micro switches. The selector and position feed-back are mechanical. Dan Schaefer