|
|
Posted for "Jim Vosters" <jvosters@adelphia.net>:
What is cab-o-sil and where do you get it??
Jim Vosters
Legacy #186
Use drill bits to cut the micro while still wet. Trace around the
perimeter of the access panel, holding the bit perpendicular to the surface
and against the side of the panel. Put a little cab-o-sil in the micro so it
doesn't sag back in the gap after you cut it. 80 grit sandpaper or Permagrit
sticks can be used to clean up the gap after the micro cures.<<<
|
|