Return-Path: Sender: (Marvin Kaye) To: lml Date: Wed, 29 Jan 2003 13:42:45 -0500 Message-ID: X-Original-Return-Path: Received: from orngca-mls02.socal.rr.com ([66.75.160.17] verified) by logan.com (CommuniGate Pro SMTP 4.0.5) with ESMTP id 2003210 for lml@lancaironline.net; Wed, 29 Jan 2003 13:37:03 -0500 Received: from walter (bak-24-161-206-40.bak.rr.com [24.161.206.40]) by orngca-mls02.socal.rr.com (8.11.4/8.11.3) with SMTP id h0TIYtn28238 for ; Wed, 29 Jan 2003 10:34:55 -0800 (PST) X-Original-Message-ID: <008001c2c7c5$ce9744e0$28cea118@bak.rr.com> From: "Walter Dodson" X-Original-To: "Lancair Mailing List" References: Subject: Re: Gaps at doors and access panels X-Original-Date: Wed, 29 Jan 2003 10:39:50 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Bill, Use tape for your parting line. It leaves nearly no gap to start. Hand sand untill you can fit folded sandpaper into the gap when panel/door is closed. Gradually sand it out untill you are using stiff cardboard with sticky back sandpaper on both sides. Make that tool as thick as you want your gap by adding paper. It should be sanding both sides of the gap. Your gaps will be perfect. Walter Dodson IV-P in test 13.5 hrs