Return-Path: Sender: (Marvin Kaye) To: lml Date: Wed, 29 Jan 2003 10:56:19 -0500 Message-ID: X-Original-Return-Path: Received: from puffin.mail.pas.earthlink.net ([207.217.120.139] verified) by logan.com (CommuniGate Pro SMTP 4.0.5) with ESMTP id 2002986 for lml@lancaironline.net; Wed, 29 Jan 2003 10:52:04 -0500 Received: from lsanca1-ar16-4-47-004-198.lsanca1.elnk.dsl.genuity.net ([4.47.4.198] helo=skipslater) by puffin.mail.pas.earthlink.net with asmtp (Exim 3.33 #1) id 18duVO-0007MR-00 for lml@lancaironline.net; Wed, 29 Jan 2003 07:52:03 -0800 X-Original-Message-ID: <003d01c2c7ae$8efd5840$0200000a@earthlink.net> Reply-To: "Skip Slater" From: "Skip Slater" X-Original-To: "Lancair Mailing List" References: Subject: Re: [LML] Gaps at door and access panels X-Original-Date: Wed, 29 Jan 2003 07:52:52 -0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0030_01C2C76B.6CEA07A0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2720.3000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 X-ELNK-Trace: cbee950bdf563876c8ad50643b1069f8239a348a220c260946e57b2e109c4e99bf51439c6ce50506387f7b89c61deb1d350badd9bab72f9c350badd9bab72f9c This is a multi-part message in MIME format. ------=_NextPart_000_0030_01C2C76B.6CEA07A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Bill, We used pieces of hacksaw blades. They're the right width, firm = enough, yet flexible and can be shaped on the ends with a grinder if = needed. The method used was to spread the filler in the gap, let it = thicken a little and run the hacksaw blade along the edge of the panel, = leaving an even, uniform gap all the way around. Skip Slater ------=_NextPart_000_0030_01C2C76B.6CEA07A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Bill,
   We used pieces of hacksaw=20 blades.  They're the right width, firm enough, yet flexible and can = be=20 shaped on the ends with a grinder if needed.  The method used = was to=20 spread the filler in the gap, let it thicken a little and run the = hacksaw blade=20 along the edge of the panel, leaving an even, uniform gap all the way=20 around.
   Skip = Slater
------=_NextPart_000_0030_01C2C76B.6CEA07A0--