Posted for "Matt & Bobbi  Hapgood" <hapgoodm94@alum.darden.edu>:

Chuck -

Please give me a call (704-373-1012) to discuss the exhaust issue... I am
just about at wits end.  It seems as if every 30 hours I have to remove the
#1 or #3 and have it welded...

I currently have the exhuasts supported via:

an adel on the lower aft part of the engine mount, to which I attach
a rubber exhaust hangar (about 2.5 inches long) which has
a bolt running through it with a 1/2" spacer on each side of the rubber
exhaust hangar, which attaches to one
clamp on each exhaust.  So each exhaust pipe (#1 & #3) is attached to the
same rubber hanger, but spaced about 1" apart due to the spacers.

Matt