Return-Path: Sender: (Marvin Kaye) To: lml Date: Thu, 23 Jan 2003 12:29:03 -0500 Message-ID: X-Original-Return-Path: Received: from imo-d08.mx.aol.com ([205.188.157.40] verified) by logan.com (CommuniGate Pro SMTP 4.0.5) with ESMTP id 1995839 for lml@lancaironline.net; Thu, 23 Jan 2003 12:21:04 -0500 Received: from Sky2high@aol.com by imo-d08.mx.aol.com (mail_out_v34.13.) id q.1d3.a0622b (3850) for ; Thu, 23 Jan 2003 12:20:58 -0500 (EST) From: Sky2high@aol.com X-Original-Message-ID: <1d3.a0622b.2b617e79@aol.com> X-Original-Date: Thu, 23 Jan 2003 12:20:57 EST Subject: Possible nose gear leg rod end X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_1d3.a0622b.2b617e79_boundary" X-Mailer: AOL 8.0 for Windows US sub 4104 --part1_1d3.a0622b.2b617e79_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit McMaster-Carr has a "style 4" zinc-plated Chrome alloy steel housing, chrome plated 52100 ball and Teflon lined race for a 1/4" bolt that is 3/8 inch wide with a 1/4-28 male thread for a static load of 5262 pounds ($15). The 1/4" male threaded part would keep 1/8" of link material left at the thinnest to each side of the hole in the link but I am bothered by the fine-thread pitch. That may not be enough to hold the pulling load or allow a helicoil insert? Any comments? Scott Krueger N92EX --part1_1d3.a0622b.2b617e79_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit McMaster-Carr has a "style 4" zinc-plated Chrome alloy steel housing, chrome plated 52100 ball and Teflon lined race for a 1/4" bolt that is 3/8 inch wide with a 1/4-28 male thread for a static load of 5262 pounds ($15).  The 1/4" male threaded part would keep 1/8" of link material left at the thinnest to each side of the hole in the link but I am bothered by the fine-thread pitch.  That may not be enough to hold the pulling load or allow a helicoil insert?

Any comments?

Scott Krueger
N92EX --part1_1d3.a0622b.2b617e79_boundary--