Mailing List lml@lancaironline.net Message #1636
From: Rumburg, William <wrumburg@cdicorp.com>
Subject: RE: overcenter link springs
Date: Mon, 18 Jan 1999 08:53:16 -0500
To: 'ROMJULFBN@aol.com' <ROMJULFBN@aol.com>, 'lancair.list@olsusa.com' <lancair.list@olsusa.com>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
>  My question  -  is this a part that will wear over a short period of
>time, or have I got other problems?
>Fontis -
>   You've hit on something that I feel is an inferior design. I replaced my
>original "screen door" springs with the "rat trap" springs about two years
>ago. I had excellent free fall and overcenter link snap with the original
>springs, both on the jackstand and at 100 mph IAS. After installing them, the
>rat trap springs were clearly more anemic and so was the main gear free fall.
>Except for some slight aesthetic gain, this is not an improvement. I don't
>feel the screen door springs look too bad. Needless to say, I removed the rat
>trap springs and deposited them in the trash can.
>                                    Bill Rumburg
>                                    N403WR  (Sonic BOOM)
>                        
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster