Return-Path: <lancair.list-request@olsusa.com>
Received: from marvkaye.olsusa.com ([205.245.9.112]) by truman.olsusa.com
          (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35)
          with SMTP id com for <lancair.list@olsusa.com>;
          Wed, 13 Jan 1999 23:01:19 -0500
Message-Id: <3.0.3.32.19990113230115.02cd1f74@olsusa.com>
Date: Wed, 13 Jan 1999 23:01:15 -0500
To: lancair.list@olsusa.com
From: Marvin Kaye <marvkaye@olsusa.com>
Subject: BID laminating suggestion
X-Mailing-List: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
We have discussed many ways of providing for bubble-less BID layups,
everything from standard fiberglass mat air-rollers, to cutoff brush
technique, to the Lancair-suggested bolt-roller, to using a pin to coax out
tiny air bubbles, ad nauseum.  I thought I had my technique perfected and
have been mostly happy with my results, but found a far superior (for me,
anyway) method of getting a great wetout, one that worked MUCH better than
anything I'd tried previously.  

I was doing the 8-BID layups (performed as 2- 4-BID ones) on the flap
acutator bulkheads (and much prefer individual layups to multi-thickness
ones done plastic-sandwich style, especially for something this thick) and
found that a 4" length of plain old hardware store variety 1/4-20 threaded
rod rolled back and forth over the layup with my fingertips gave me much
greater control and probably the best layup I've done since I started my
project.  I wish I'd been doing this all along, the results are truly
amazing.  Try it, you'll like it.

   <Marv>