Return-Path: Sender: (Marvin Kaye) To: lml Date: Tue, 15 Oct 2002 21:40:36 -0400 Message-ID: X-Original-Return-Path: Received: from imo-d04.mx.aol.com ([205.188.157.36] verified) by logan.com (CommuniGate Pro SMTP 4.0b9) with ESMTP id 1806293 for lml@lancaironline.net; Tue, 15 Oct 2002 20:11:37 -0400 Received: from Newlan2dl@aol.com by imo-d04.mx.aol.com (mail_out_v34.13.) id q.da.1f70b766 (4552) for ; Tue, 15 Oct 2002 20:11:29 -0400 (EDT) From: Newlan2dl@aol.com X-Original-Message-ID: X-Original-Date: Tue, 15 Oct 2002 20:11:29 EDT Subject: Adding bondo to the white foam X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: AOL 7.0 for Windows US sub 10637 The problem with bondoing on to the back of syrofoam is that the styrene in Bondo attacks the foam also although not to the extent that resin would. Still it will tend to distort the surface. Also, Bondo doesn't release well even when well waxed. Lastly, you would have to bondo the whole thing. Bondo is a LOT harder than foam and sanding cuts down the foam very fast while leaving the bondo standing out, even when sanding with a block. Green foam used for flower arranging is not affected by styrene and could be used also but that stuff is real garbage. Divinycell is expensive and harder to get but is unaffected by styrene so that may be more viable but it is harder to shape. Anyway, if you are goig to use styrofoam, it is a lot better to tape over it or Saran wrap it than to Bondo or dissolve out the stuff. Dan Newland ES #61