Content-Type: text/plain; charset=ISO-8859-1
Content-Disposition: inline
X-Mailing-List: lancair.list@olsusa.com

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Message text written by "bobjude"
>>>
Question.  Where are you going to connect your fuel pressure
transducer?
There is no connection on the carburetor, if yours is like mine.  I wrote
a letter to Tony Bingelis and asked him what he did on his.  His answer
was to use a AN822-6 elbow and drill and tap an additional hole for
1/8 NPT pipe thread.  I mounted my fuel pressure transducer on the
firewall and ran 303 flex hose from the the 822-3 elbow (threaded into
the tapped hole) to the transducer.  There may be a better way to do
this but this is the best I could come up with.
<<<

Bob,

        I have a carburated 320.  I wasn't planning on installing a fuel
pressure transducer unless you think there is some pressing need for one.

I'm going by my experience flying carberated "Spam Cans" which don't
usually have fuel pressure gauges.

Don Gordon