Return-Path: <marv@lancaironline.net>
Sender: <marv@lancaironline.net> (Marvin Kaye)
To: lml
Date: Thu, 01 Aug 2002 18:14:22 -0400
Message-ID: <redirect-1680258@logan.com>
X-Original-Return-Path: <valin.b.thorn1@jsc.nasa.gov>
Received: from jsc-ems-vws04.jsc.nasa.gov ([139.169.39.51] verified)
  by logan.com (CommuniGate Pro SMTP 4.0b6)
  with SMTP id 1680227 for lml@lancaironline.net; Thu, 01 Aug 2002 17:23:57 -0400
Received: from 139.169.16.59 by jsc-ems-vws04.jsc.nasa.gov (InterScan E-Mail VirusWall NT); Thu, 01 Aug 2002 16:02:55 -0500 (Central Daylight Time)
Received: by jsc-smtp01.jsc.nasa.gov with Internet Mail Service (5.5.2653.19)
	id <3V31LCJ5>; Thu, 1 Aug 2002 16:02:55 -0500
X-Original-Message-ID: <1848CABD3587A84DAC6B3F82FE01D9FC01F1FA7E@jsc-mail08.jsc.nasa.gov>
From: "THORN, VALIN B. (JSC-OM) (NASA)" <valin.b.thorn1@jsc.nasa.gov>
X-Original-To: lml@lancaironline.net
Subject: Poly-Fiber Aircraft Finishing System?
X-Original-Date: Thu, 1 Aug 2002 16:02:55 -0500 
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain;
	charset="iso-8859-1"

Has anybody had any experience with this Poly-Fiber "Flight Gloss Composite
Finishing System"?

http://www.polyfiber.com/step/

Intro from webpage:  
--------------------------------------------------------------------------
"Poly-Fiber brings you a new finishing system for your composite project
that takes you all the way from rough assemblies on your workbench to a
dazzling finished airplane in your hangar. And you can go from fiberglass to
ready-to-paint without ever touching a spray gun! Look at these features! 

YOU CAN ROLL IT ON!    No fire hazard   No solvent fumes   Cleans up with
water    Lighter finished weight    No slurry to   measure and mix    Better
stain & solvent resistance    No expensive HAZMAT shipping"
----------------------------------------------------------------------------

I'd appreciate some suggestions on a system for finishing our Legacy...

Thanks,

Valin Thorn
Legacy 173