Return-Path: Sender: (Marvin Kaye) To: lml Date: Wed, 08 May 2002 13:52:34 -0400 Message-ID: X-Original-Return-Path: Received: from [208.26.246.18] (HELO dewey.Cadwell.cadwell.com) by logan.com (CommuniGate Pro SMTP 4.0b1) with ESMTP id 1232711 for lml@lancaironline.net; Wed, 08 May 2002 13:46:53 -0400 content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Subject: cutting table surface X-MimeOLE: Produced By Microsoft Exchange V6.0.4712.0 X-Original-Date: Wed, 8 May 2002 10:46:06 -0700 X-Original-Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: cutting table surface Thread-Index: AcH2uNswaEFI+hjMREa66zA7EWYfwg== From: "Carl Cadwell" X-Original-To: "Lancair Mailing List" Add one to the list. We used the back side of FRP board from Eagle/Lowe's for about $30 for a 4x8 sheet. Worked great for one IVP and is still very useable. Cleans up with acetone just fine. Cookie cutters seemed to do just fine, getting little nicks before becoming dull. =20 FRP is what you see in most restrooms of restaurants. The marbled side is out and often painted. It is tough stuff. Cuts with a saw. Carl Cadwell =20 N25CL