Return-Path: Sender: (Marvin Kaye) To: lml Date: Tue, 07 May 2002 12:40:59 -0400 Message-ID: X-Original-Return-Path: Received: from smtp02.mrf.mail.rcn.net ([207.172.4.61] verified) by logan.com (CommuniGate Pro SMTP 4.0b1) with ESMTP id 1231723 for lml@lancaironline.net; Tue, 07 May 2002 12:39:13 -0400 Received: from 208-59-158-170.s170.tnt2.frdb.va.dialup.rcn.com ([208.59.158.170] helo=OFFICE) by smtp02.mrf.mail.rcn.net with smtp (Exim 3.33 #10) id 1757ze-0003WM-00; Tue, 07 May 2002 12:39:15 -0400 X-Original-Message-ID: <00bd01c1f5d8$50d9da00$aa9e3bd0@OFFICE> From: "Bill & Sue" X-Original-To: "Lancair Mailing List" X-Original-Cc: References: Subject: Re: [LML] Cutting table surface X-Original-Date: Tue, 7 May 2002 11:03:15 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 > What are you folks using for the surfaces of cutting tables? Hi Paul, I used white tileboard from the local Home Despot. It runs about 11 bucks for a 4'x8' sheet. I put 3 or 4 layers on my work bench. It's smooth cleans up nicely with acitone, looks good and only makes small lines when you cut on it with a "pizza cutter". A sheet usually lasts me several months. When it's time to replace it, pull off the top layer and throw it away. You're instantly ready to go with the next layer. Bill harrelson@erols.com N5ZQ