Return-Path: Sender: (Marvin Kaye) To: lml@lancaironline.net Date: Tue, 16 Apr 2002 17:10:37 -0400 Message-ID: X-Original-Return-Path: Received: from mailnw.centurytel.net ([209.206.160.237] verified) by logan.com (CommuniGate Pro SMTP 3.5.9) with ESMTP id 1166602 for lml@lancaironline.net; Tue, 16 Apr 2002 16:58:52 -0400 Received: from c656256a (pppoe2134.gh.centurytel.net [64.91.54.142]) by mailnw.centurytel.net (8.12.2/8.12.2) with SMTP id g3GKwWOC026252 for ; Tue, 16 Apr 2002 13:58:33 -0700 (PDT) X-Original-Message-ID: <000701c1e581$f1798760$3e4ffea9@mshome.net> From: "Robert Smiley" X-Original-To: "Lancair Mailing List" References: Subject: Re: [LML] Re: 320 MKII hydraulic pump "clunk, clunk clunk" noise X-Original-Date: Tue, 16 Apr 2002 14:04:39 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Matt, I just told Dan in a separate e-mail that I solved the problem by reducing the pressure sensor switches for the hi and low side so that the pump completed its work raising or lowering the gear into the locked position and have the pump run no more than about two-three seconds. As the pump labors and bypasses, it works harder, draws more amperage and thus lowers voltage. Reduce the time the pump labors to the minimum and your equipment may not reset. That solved my problem Bob Smiley