Return-Path: Received: from imo11.mx.aol.com ([198.81.17.1]) by truman.olsusa.com (Post.Office MTA v3.1.2 release (PO203-101c) ID# 0-44819U2500L250S0) with ESMTP id AAA16124 for ; Wed, 2 Dec 1998 21:04:08 -0500 Received: from Sky2high@aol.com by imo11.mx.aol.com (IMOv18.1) id 1TCTa20899 for ; Wed, 2 Dec 1998 21:04:06 +1900 (EST) From: Sky2high@aol.com Message-ID: Date: Wed, 2 Dec 1998 21:04:06 EST To: lancair.list@olsusa.com Subject: SS Firewall edge bevelling tool X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> To: Person who sent e-mail to me directly -- that evening was a mess for my e-mail processing..... I believe the request was for information about the tool I used to bevel the edge of the stainless steel firewall. It is listed under "flanging tool" in the 1996-1997 Aircraft Spruce catalog (page 370). This is in the "tools" section as Part no. 12-00600 ($16.50) just after fluting pliers and before deburring tool. This tool is difficult to use. Wear leather gloves and practice on scrap material first. Scott Krueger N92EX