<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
It was interesting to see that Lancair does not
recommend a solvent wash after sanding. While I
agree with this, consider that the sandpaper may
be contaminated from the manufacturing process. I
wear cotton gloves and finish up with a piece of
well used paper on the theory that most of the
contamination has been transferred to the early
cuttings (dust particles).

While 40-80 grit may be acceptable for the thick
edge of molded parts it is way too coarse for
midpart attachments where there may be only 2
plies between you and the core material. I
suggest something in the 180-220 range.
HANNAHAN
WFHANNAHAN@YAHOO.COM




>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>