<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I did an alternate. to thickening the sliders to 1/4 inch.  Instead, I
replaced the 1/8 inch whatever it was that was supplied with the kit with
1/8 inch Delrin.  Delrin is much more rigid than the original material
and being a Dupont engineering polymer, I expect it will last well.  It
has been in place now for several months and showing no wear.  Even
though the rigidity of the original design was not a problem, the wear or
the original material was, and it had worn enough so the doors were not
opening enough to allow the tires to clear.  I added another 1/8 inch of
height when the Delrin was put in.  When the original sliders are removed
they can be used as  patterns to cut and drill the Delrin.  I had to get
a 20 x 48 inch sheet of the 1/8 in. Delrin so have a 16 X 48 inch piece
left over, enough to cut 4 two inch pairs.  If anyone is interested, each
pair is $25.00  Bob Young  RYoung03A@aol.com or oldbobyoung@juno.com.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>