Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5.4) with ESMTP id 1045976 for rob@logan.com; Thu, 14 Feb 2002 11:02:58 -0500 Received: from out004.verizon.net ([206.46.170.16]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Thu, 14 Feb 2002 09:10:56 -0500 Received: from GCasey ([207.175.254.66]) by out004.verizon.net (InterMail vM.5.01.04.05 201-253-122-122-105-20011231) with SMTP id <20020214141254.SODN11372.out004.verizon.net@GCasey> for ; Thu, 14 Feb 2002 08:12:54 -0600 Reply-To: Reply-To: lancair.list@olsusa.com From: "Gary Casey" To: Subject: Elevator mis-match Date: Thu, 14 Feb 2002 06:10:56 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Importance: Normal In-Reply-To: <20020214061829.AAA4935@pop3.olsusa.com> X-Mailing-List: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> One of the problems I am having is a mismatch between elevators. The Bracket that connects the two was installed as part of the kit and now that I finally am able to mount the elevators to the stabilizer I find that the trailing edge of one elevator doesn't match the other by about 1/8 to 1/4 inch. Should I worry about this? If so, any suggestions about how to correct it? Gary Casey ES project >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://members.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please remember that purchases from the Builders' Bookstore assist with the management of the LML. Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>