Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5b3) with ESMTP id 870876 for rob@logan.com; Wed, 26 Sep 2001 12:35:02 -0400 Received: from hotmail.com ([216.33.237.195]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Wed, 26 Sep 2001 01:44:49 -0400 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 25 Sep 2001 22:56:17 -0700 Received: from 163.206.96.16 by lw7fd.law7.hotmail.msn.com with HTTP; Wed, 26 Sep 2001 05:56:17 GMT From: "Ed Sikora" To: lancair.list@olsusa.com Bcc: Subject: Hysol and Control rods Date: Wed, 26 Sep 2001 05:56:17 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> One thing I did when assembling my control rods was to slightly rough up the inside of the AL tube and OD of Male threaded fitting and apply structural adhesive (Hysol) to the tube and the fitting...figured it couldn't hurt to have the ends bonded in as well as rivited together. Anyone see anything wrong with this?-Ed Sikora >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>