<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I've been miced once or twice.  They didn't eat the glass (wimps) they just
poop all over it! (I didn't check the poop for micro/flox) Re carbon:
there's so little carbon cloth that I just keep it in the thick plastic bag
it came in.  Never had a problem.

FWIW, I made my cutting table with a cover to keep the dust off of the
rolled out glass.  Just some thin paneling on a piano hinge and side
supports.  Unfortunately, the rear, where the bolt of glass is, is open to
the back.  Now what I need to do is staple some thin paneling across the
back to keep the buggers out.

I strongly recommend some dust cutting method for your cutting table.  You
want that stuff clean and ready to go.

-Ed McCauley
Milford, NJ
Lancair IV-P -23.493 +/- 30% Complete


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>