Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5b3) with ESMTP id 850575 for rob@logan.com; Tue, 14 Aug 2001 11:21:04 -0400 Received: from gemini.perigee.net ([166.82.201.3]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Tue, 14 Aug 2001 08:40:38 -0400 Received: from perigee.net (dial2-120.clt.perigee.net [166.82.202.120]) by gemini.perigee.net (8.9.3/8.9.3) with ESMTP id IAA04707; Tue, 14 Aug 2001 08:50:45 -0400 Message-ID: <3B791ED3.FC21225F@perigee.net> Date: Tue, 14 Aug 2001 08:51:31 -0400 From: John Schroeder Reply-To: jschroeder@perigee.net Reply-To: lancair.list@olsusa.com MIME-Version: 1.0 To: lancair.list@olsusa.com, "Sundin, Carsten" , Mark Mahnke Subject: Re: Bolt Torques References: <007CE43F.C21254@udlp.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailing-List: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> We asked the tech support folks at Lancair about torque values. They said that they were in the first chapter of the ES Assembly Manual. We could not find them. Does anyone else have a reference for the values used on the ES? Mark Mahnke said that they are lower than those used in 43-13. He gave us the value for the 3/16" bolts as 20-25 inch-pounds. We would like to have a complete table for reference. Thanks, John Schroeder & Ron Szot >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>