Reply-To: <DAP@DParsons.com>
Reply-To: lancair.list@olsusa.com
From: "Don Parsons" <DAP@DParsons.com>
To: <lancair.list@olsusa.com>
Subject: RE: Ryan 9900B & Insight Strikefinder
Date: Fri, 10 Aug 2001 16:25:41 -0500
Message-ID: <LPBBJFJENNLEHCCJAMLGIEDIDLAA.DAP@DParsons.com>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Importance: Normal
In-Reply-To: <3B74298B.23D76A@perigee.net>

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Pacific Coast Avionics (http://www.pacific-coast-avionics.com/) and Gulf
Coast Avionics (http://www.gulf-coast-avionics.com/) APPEAR to be the same
people (at some level). For some time I was trying to decide which would be
the best way to go... do the panel myself, or buy a custom made panel. I
have found out more recently that both will do intermediate steps. For
example, you can have them pre-wire the avionics harness. At AirVenture I
was scrutinizing the back of one of their sample panels. The guy there that
started talking to me invited me behind the display table once I told him
what I was doing so I could get a better look. That is when he told me that
there were options between doing it completely myself and getting a fully
completed custom panel. He was most helpful, and I found that option very
interesting. A rep at the AeroTronics (http://www.AeroTronics.com/) booth
did the same thing and told me about the same options.

Don Parsons
LNCE FB - Kit Scheduled Ship Date Sept 14, 2001


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>