Return-Path: <lancair.list-request@olsusa.com>
Received: from pop3.olsusa.com ([63.150.212.2] verified)
  by logan.com (CommuniGate Pro SMTP 3.5b3)
  with ESMTP id 847004 for rob@logan.com; Sun, 05 Aug 2001 18:21:18 -0400
Received: from web20003.mail.yahoo.com ([216.136.225.48])
          by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223
          ID# 0-71866U8000L800S0V35) with SMTP id com
          for <lancair.list@olsusa.com>; Sun, 5 Aug 2001 11:12:03 -0400
Received: from [64.161.25.233] by web20003.mail.yahoo.com; Sun, 05 Aug 2001 08:21:51 PDT
Message-ID: <20010805152151.67950.qmail@web20003.mail.yahoo.com>
Date: Sun, 5 Aug 2001 08:21:51 -0700 (PDT)
From: Tammy and Mike Salzman <arrow54t@yahoo.com>
Reply-To: arrow54t@yahoo.com
Reply-To: lancair.list@olsusa.com
Subject: Re: Factory comments regarding ES horizontals
To: lancair.list@olsusa.com
Cc: jschroeder@perigee.net
In-Reply-To: <3B6D3894.885761E6@perigee.net>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailing-List: lancair.list@olsusa.com

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
John and Ron,

<SNIP>
--- John Schroeder <jschroeder@perigee.net> wrote:
>We have
> closed out the
> H-S, but your remark in this posting about the 3 BID layup in the aft
> spar-to-skins channel made us stop and think. We are not sure if it
> is required.
> The hinge brackets were already installed and marked as torqued with
> lacquer.
<SNIP>

Humm, Just last week, Carsten told me that the 3 BID was not required
if you have the C-channel aft spar.  He also said that the 2 BID is
required on the inboard elevator ribs where the actuator arm attaches. 


<SNIP>
> We also found that the top spacer on the hinge weldment prevented the
> full up
> travel. It hit the hinge bracket so we had to file that one down.
> Looks like that
> may be a recurring problem for anyone, especially if the hinges are
> already
> installed.
<SNIP>

My hinges were already installed and torque sealed as well, but I have
not checked the travel as yet.  I will post my findings when I get
there.
I did, however have problems with the alignment of the actuator arm on
the elevator inboard ribs.  The thing did not line up with the ribs.  I
have sent an e-mail with photos to Carsten.  I expect an answer on
Monday.  You can see photos of the problem at:

http://y42.photos.yahoo.com/bc/mylnce/lst?.dir=/Elevator+Problems&.view=t

Mike Salzman
LNCE (FB) N811ES 25%
Fairfield, CA



>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>