Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5b3) with ESMTP id 843778 for rob@logan.com; Wed, 01 Aug 2001 16:02:13 -0400 Received: from mailcity.com ([209.185.123.154]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with SMTP id com for ; Wed, 1 Aug 2001 15:06:34 -0400 Received: from Unknown/Local ([?.?.?.?]) by mailcity.com; Wed Aug 1 12:15:59 2001 To: lancair.list@olsusa.com Date: Wed, 01 Aug 2001 14:15:59 -0500 From: "Aaron May" Message-ID: Mime-Version: 1.0 Reply-To: aaronmay82@lycos.com Reply-To: lancair.list@olsusa.com Subject: Re: Legacy Canopy Organization: Lycos Mail (http://mail.lycos.com:80) Content-Type: text/plain; charset=us-ascii Content-Language: en Content-Length: 1059 Content-Transfer-Encoding: 7bit X-Mailing-List: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> <built into the canopy and why.>> The Legacy canopy consists of three major components: the stiffener (frame might be a better description), the glass and the skin. The stiffener is a carbon-fiber molded piece that is essentially like the skin, only with a big "C" bend on the inside. It serves as the primary structure as well as the inside of the canopy. The stiffener is to be cut apart in the back to allow it to "custom fit" to the fuselage. Then the gap (mine ended up being about 1/8") is bridged with a total of 6 BIDS (3 2Bids varying in length). The "C", as I call it (think of it as a channel), is then fitted with 1/4" foam along the top and down to about the canopy latch, where it is terminated. Then the foam is closed out with a 4-BID. I know it's probably very difficult to picture, but hopefully that will help you.Let me know if anything else needs to be explained. Aaron May >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>