Message-ID: <1087696226.40d4ed6248ad7@webmailapp1.cc.utexas.edu>
Date: Sat, 19 Jun 2004 20:50:26 -0500
From: msteitle@mail.utexas.edu
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: LS1 Coils and Harness II
References: <list-190244@logan.com>
In-Reply-To: <list-190244@logan.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 8bit
User-Agent: Internet Messaging Program (IMP) 3.2.2

Dale,
I'm sorry, but there's no way I can tell for sure.  The first ones I ordered
looked like they would fit, but once I tried them on a coil, they didn't match
up and had to be sent back.  Like I said, the parts man got a bit miffed at me
before it was all said and done.  You might be albe to go to a major GM
dealership and try some of what they have in stock.  Make friends with a GM
counter-person.  Or, maybe ask someone on the Corvette SIG.  A couple of days
back I posted the numbers of what I ended up with.  I do know that they work.
Coil p/n - 12558693 (AC Delco p/n - D581)
Connector p/n - 12126487  (AC Delco p/n - PT757) (These require slight mod.)

Mark S.

> No, Dale, I ordered the 12582190 instead of the 12569111.  The reason is that
> I was using the 12558948 coils which are a bit different that the ones that
> Mark are using.  They plugs may well be interchangeable, but I didn't want to
> chance it.  The plugs/harness I ordered DO fit the 12558948 coils
> 
> One down side on the harness is that the leads are fairly short in length
> which sort of restricts you in positioning the coils IF you are going to use
> the harness as it.  If you are simply going to clip the plugs and attach new
> wires then of course it doesn't matter.
> 
> I am checking into a source of the plugs.  I have ordered the components
> needed to build up a plug and will check and see if it fits.  If so and you
> are willing to crimp the terminals on the ends of the wire and install them
> in the plug then this source may be even less expensive and you won't have to
> clip and splice wires..
> 
> I will let you know in the next week or so.
> 
> Ed
> 
> Ed Anderson
> RV-6A N494BW Rotary Powered
> Matthews, NC
>   ----- Original Message ----- 
>   From: Dale Rogers 
>   To: Rotary motors in aircraft 
>   Sent: Saturday, June 19, 2004 10:52 AM
>   Subject: [FlyRotary] Re: LS1 Coils and Harness II
> 
> 
>   Ed,
> 
>      I have a question about the part numbers, specifically 
>   the harness number.  Did you order a 12569111, but they 
>   sent you a 12582190? 
> 
>       And a question for Mark Steitle:
> 
>   Do Ed's connectors look like they will fit your # 1255693 
>   coils?
> 
>   ADVthanksANCE,
>   Dale R.
>   COZY MkIV-R13B #1254
> 
> 
> 
> 
>
------------------------------------------------------------------------------
> 
> 
>   Here is the photos with the part numbers
> 
>   Ed
> 
>   Ed Anderson
>   RV-6A N494BW Rotary Powered
>   Matthews, NC
> 
> 
>
------------------------------------------------------------------------------
> 
> 
> 
> 
> 
> 
>
------------------------------------------------------------------------------
> 
> 
> 
> 
> 
> 
>
------------------------------------------------------------------------------
> 
> 
>   >>  Homepage:  http://www.flyrotary.com/
>   >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
> 
> 
> 
> 
>
------------------------------------------------------------------------------
> 
> 
>   >>  Homepage:  http://www.flyrotary.com/
>   >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>