Message-Id: <36u631$16ta9m@mxip09a.cluster1.charter.net>
From: <cardmarc@charter.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Fuel pumps in tank
Date: Fri, 18 Jun 2004 16:27:02 +0000
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Not necessarily. A recess in the top of the tank can hold a top mount pump.Then a cover over that for access at skin. The pump sits below at bottom of tank, like in the car. It's workable.
> 
> From: "Russell Duffy" <13brv3@bellsouth.net>
> Date: 2004/06/18 Fri AM 02:14:34 GMT
> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> Subject: [FlyRotary] Re: Fuel pumps in tank
> 
> It is possible to mount the pumps in a RV tank using a stock fuel pump /
> holder assembly from a Ford EFI car.  Some Ford vehicles use an in-tank
> mount that is 'L' shaped; ie, it can fit in the outside/end rib and make the
> turn so the fuel pump is vertical. 
> 
>  
> Hi Ken,
>  
> I had figured something like this was possible, but there's no way you'll
> ever be able to replace one of those without removing the tank, and that's a
> pretty major hassle until you paint the plane, then it becomes something you
> want to avoid at all costs.  I don't see any way to do this without screwing
> up your paint.    Fortunately, if you buy a new pump, you'll probably never
> have to replace it.  Every decision is a compromise.
>  
> Cheers,
> Rusty (may actually get to fly this weekend)
> 
> 
> 
> 
> 
> 
>