Message
- Do you have a fuel
pressure sensor on both pumps, or just one?
On both.
Where exactly
are the pressure sensors installed? Are they right at the carbs, or maybe
right after the pump. I guess the universal thought would be that the
restriction would have to be somewhere before the pressure
sensor.
On the
subject of firesleeve, I was highly disappointed in that stuff with rev-1.
For some reason, I thought it would shield the item inside from heat, but
that seems to be incorrect. I put it on my throttle cable (several inches
from the turbo), and it melted the plastic on the outside of the cable
housing. I put it on one of my motor mount tubes (maybe only an inch from
the turbo), and it melted the paint off the tube. As far as I can tell, it
doesn't do a good job at all of stopping heat transfer, though it will probably
buy you a couple minutes if flames are licking at the tubing, which is what it
was made for.
Cheers,
Rusty (wasp
free, but still on call)
|