|
Message
Actually I'm wondering if you used any of that
extruded fuel rail or if it is a design of your own creation. I'd had plans to
change my rail and Dave sent me his old rails to work with, but now I've changed
my mind again. I do have an idea that would use a piece of the extruded rail.
Someone on the list had a piece to sell, so I'm thinking about it. Maybe I'll
just collect fuel rails. Seems that everybody is collecting
something:-)
I used one of the extruded rails that fit my
TB's. It already had the holes bored for the injectors, as well
as threaded ends for the fittings. Of course it was too short to
fit between the secondary holes on the manifold. What I did was
cut it in half, which leaves about a half inch hole. I got some half
inch OD, .065 tubing from Spruce, and welded it between the two halves to make
it the proper distance. I used 1/8" aluminum for the rail mount,
which attaches with two of the intake bolts.
You sent a link to your model
once before but I don't remember what it looks like. Can you send it again?
After looking at the Jetson version (really cool... if it ever works), I'm
curious again about yours.
There
aren't a lot of great pictures online, but here's a web page with some
interesting stuff.
Caution; Off topic comment
....
Since you've brought up
hockey. With all the Florida residents on the list there must be some Tampa Bay
Lightning fans amongst you?
We have a hockey team? Why
:-)
Rusty
|