I have something close to this.  Ford Mustang injectors with 300ZX connectors.  These fit perfect.  However, the 300zx connectors don't want to fit the Mazda 550cc injectors.  Ordered a set of MSD-2004's yesterday.  Will report back when they arrive.

Mark S.


 At 02:09 AM 5/27/2004 +0000, you wrote:

When I was measuring Ford and Mazda fuel injectors I found that the Mazda plug fit the Ford injector.  I suspect that the Ford pluag will fit the Mazda injector.  The Ford plugs are plentiful - someone in need should check this out.

Ken Powell




From:    "Tommy James" <twjames@statesville.net>
To:    "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject:    [FlyRotary] Re: Fuel Injectors
Date:    Thu, 27 May 2004 02:01:12 +0000
Content-Type: Multipart/alternative;
 boundary="NextPart_Webmail_9m3u9jl4l_11680_1085623784_1"

A couple of years ago, I bought 'surplus' injector connectors from Dave Atkins.  I sent an injector and they found and returned good used plugs.  Also had good results with two 1/8" slip-on straight connectors, potted in liquid electrical tape.  It may not be pretty, but it works...:-)
TJ

If you go to Advance Auto Parts or AutoZone web site and follows the directions for the RX-7, you can find a Beck Arnley replacement.  I have four that work like they are supposed to. regards, Tommy James<><

You mean, as opposed to those old stock injectors you sent me :-)  I got them today (and sent your intake).  Thanks!

 

Did you ever find electrical plugs to fit the stock injectors?  I was always under the impression that you could get the plugs for the non-turbo injectors, but not for the turbo's.  As it turns out, the same plug fits my turbo injectors, and the non-turbo injectors that you sent.  Damn odd, and very confusing. 

 

Rusty (haven't done crap on the intake in two days)

>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html