----- Original Message -----
Sent: Wednesday, May 26, 2004 8:50
PM
Subject: [FlyRotary] Re: Fuel
Injectors
If you go to Advance Auto Parts or AutoZone web site and
follows the directions for the RX-7, you can find a Beck Arnley
replacement. I have four that work like they are supposed to. regards,
Tommy James<><
You mean, as opposed
to those old stock injectors you sent me :-) I got them today (and sent
your intake). Thanks!
Did you ever find
electrical plugs to fit the stock injectors? I was always under the
impression that you could get the plugs for the non-turbo injectors, but not
for the turbo's. As it turns out, the same plug fits my turbo injectors,
and the non-turbo injectors that you sent. Damn odd, and very
confusing.
Rusty (haven't done
crap on the intake in two days)
Hi, Rusty....my TWM throttlebody that I
purchased from Dave Atkins came with two injector plugs and the necessary pins
which you solder the wire to and then insert into the injector plug until it
snaps into position. You may be able to get them from him if you can't
find anything local or less expensive. Paul
Conner