|
|
Posted for "Tracy Crook" <lors01@msn.com>:
Subject: [FlyRotary] Re: oil pan, engine mount bolts?
For those of you that use the oil pan bolts for the engine mount like
Tracy
does, what are you using for bolts? Are you just using the average Ace
Hardware bolts, or do they make Grade 8 metric hardware? How about AN
grade
6mm bolts? Do those exist?
[Go to mcmaster.com and look under cap screws... they have high strength
metric hex head bolts in all the popular sizes. <Marv> ]
Yes, that's a good source, got mine there. Also, get a 6mm x 1mm bottoming
tap and finish tapping all the oil pan holes to bottom for more thread
engagement.
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
|
|