On 5/12/04 9:01 AM, "Mark Steitle" <msteitle@mail.utexas.edu> wrote:

> Bulent,
> Is the Prelude pulley stock or aftermarket?  What it the pulley diameter,
> and armature shaft size?  I'm running ND alternators with a shaft diameter
> of .590".  If this pulley fits the ND alternator, this may be the solution
> I've been searching for.
>
> Mark S.
>
>
> At 09:29 PM 5/11/2004 -0400, you wrote:
>> I found alternator from Prelude with much larger pulley than the stock
>> Mazda.
>> Here is the picture: Mazda on the left.
>>
Mark, I forgot to measure the diameter but both alternators are Nipondenso
and the shafts, nuts and the grooves are the same. Just larger diameter.
I'll check the D tomorrow,
Bulent