|
|
TIG it up with 1100 rods and it should be fine. Mike C.
----- Original Message -----
From: "Scott" <squiggles@yahoo.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, April 29, 2004 6:29 PM
Subject: [FlyRotary] Cutting down the water pump
> Hello All...
>
> I have taken a spare water pump housing I had and
> hacked off the top neck( as you can see in the
> attached photo )...
>
> Does anyone know what type of aluminum the housing is
> made out of?
>
> I hope to have a plate welded over the top of both
> openings. Sealing the thermostat recirc shaft and
> having a neck welded on the other opening. The hope
> is to save 2" or so by doing this route. I am hoping
> someone else has gone this route and can give a few
> pointers, like will this work? What aluminum alloy
> did you use for the plate? For the pipe neck?
>
> Any help is appreciated...
>
> Thanx...
>
> -Scott
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Win a $20,000 Career Makeover at Yahoo! HotJobs
> http://hotjobs.sweepstakes.yahoo.com/careermakeover
----------------------------------------------------------------------------
----
----------------------------------------------------------------------------
----
> >> Homepage: http://www.flyrotary.com/
> >> Archive: http://lancaironline.net/lists/flyrotary/List.html
>
|
|