Steve,

I used 6800-7000 rpm, 36-38” MP with F/A in the 12’s for takeoff.  Around pattern altitude I would reduce to 6000 rpm and 30-32” MP with F/A a little richer than best power in the 13’s. I monitored EGT’s during all phases of flight and would make mixture changes as needed to keep EGT around 1600 or less during high power operations. I used a vernier cable to control the super charger bypass and could dial in the desired MP. For the turbo I was planning a 4# waste gate with an air control valve to apply more pressure to the top of spring at higher altitudes or lower rpm. Still using the same target numbers as with the super charger. But no turbo for the S21 project. I guess I need to sell it at some point. 

So I only used boost for takeoff and for normalization most of the time. I liked operating  28- 30” with the prop between 1700-2000 rpm. Rich or lean to keep the EGT under 1600F and intake temps under 140F. 

Bobby

Sent from my iPad

On Jul 17, 2020, at 9:53 PM, Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net> wrote:

Thanks Bobby.
What boost are you running?

And I meant to ask, my friend is asking what power setting we consider the engine to be OK with for continual operation?

Steve Izett

> On 18 Jul 2020, at 9:59 am, Bobby J. Hughes bhughes@qnsi.net <flyrotary@lancaironline.net> wrote:
>
> My preferred cruise economy settings 30” MP, 4800-5200 rpm. F/A 15:8 lean. Or 30-34” MP, 5200-5400 rpm F/A 14:0 or whatever was need to keep EGT below 1600F and intake air temp below 140F.
>
> Bobby
>
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
> Sent: Friday, July 17, 2020 7:10 PM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] over square and detonation of a rotary for my pilot friend
>
> Hi people.
>
> My test pilot friend and I are continuing our journey of extending the phase#1 envelope and now experimenting with engine settings.
> With a flight adjustable prop he is asking questions about 'over square' and detonation.
> Can anyone give me an answer for him?
>
> Thanks
>
> Steve Izett
> Glasaie Super IIRG Renesis 4 port RD1C variable pitch prop.
>
>
>
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
>
> Disclaimer
>
> The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
>
> This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here.
>


--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html