My Renesis   and EC-2 had to have the clamping circuit.  Tracy added one internal  to my EC-2 and I built one into the wiring harness.  Both are still there.

Dennis Haverlah

Sent from Mail for Windows 10

Hi Finn

In regard to the EC3 CAS input, NO. I thought I checked the circuit diagram and Tracy had included the clamping in the design.

Am I wrong about that and it needs it for a Renesis CAS?

Steve

> On 13 Jun 2020, at 1:44 am, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:

>

> No other documentation than what's given in the EM3 manual.

>

> No, only the running data you see are output., so installing a camera would be good.

>

> On your EC3 board, do you have extra components soldered on related to the CAS input (J2 pin 5)?

>

> Finn

>

> On 6/12/2020 1:14 PM, Stephen Izett stephen.izett@gmail.com wrote:

>> Thanks Finn.

>> Do you have any documentation from Tracy for the Vdrive and log data that Tracy sold originally.

>> Does the Data include Mixture Correction Table info that will help with tuning or should I install a camera to record the EM3 in Track Mode.

>>

>> Cheers

>>

>> Steve

>>

>>> On 13 Jun 2020, at 1:01 am, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:

>>>

>>> --

>>

>> --

>> Homepage:  http://www.flyrotary.com/

>> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html

>>

>

>

> --

> Homepage:  http://www.flyrotary.com/

> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html

--

Homepage:  http://www.flyrotary.com/

Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html