Yes, I noticed that too. Don't know why
it stores outputs those low numbers.
I'm using the Ecotrons ALM board where default is 1.667V for
Lambda = 1.
I actually hooked up an old analog meter and marked the 1.667V
point and lean to the left, rich to the right.
So it's just the way it's stored in the EM3.
On the EM3 display that point displays about as one bar below
center (appears lean). I need to adjust the EM3 software a bit.
Finn
On 6/12/2020 1:28 PM, Bobby J. Hughes
bhughes@qnsi.net wrote:
Finn,
If
you are using a wideband O2 it looks very lean.
Bobby
From:
Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net]
Sent: Friday, June 12, 2020 1:01 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: EM3 Datalog
I'm using it.
But using the vDrive3. Had to modify the EM3 software to
get it to work. However, I may have a partly defective
vDrive3.
Sometimes it's not detected on startup, sometimes it is.
In addition to modifying it to use all eight 2 volt and all
eight 5 volt
channels I also modified the EM3 software to write a header
(or label)
row the first time a new file is opened. I also change the
comma-delimiter to a Tab character (x09h). That means I can
right-click
on a file and chose "Open with" and open with Excel 97 and all
columns
are neatly there.
Graphs are easy to make in Excel 97.
Attached from one of the better engine runs.
I didn't continue working to make?? the EM3 software for the
vDrive3 more
reliable. Instead I ordered an Arduino data logging "shield".
I intend
to modify the EM3 software so that if no vDrive is detected,
it simply
outputs the data continuously. The Arduino program I have in
mind will
combine and store the data from the EM3, Dynon D-100 and GPS.
Yes that's
a lots of columns in a spreadsheet, but I can easily write an
Excel
macro to rearrange columns and generate graphs.
Finn
On 6/12/2020 4:28 AM, Stephen Izett stephen.izett@gmail.com
wrote:
> Hi Guys
>
> Is anyone using Tracy???s EM3 Data logging feature?
> I purchased the USB drive with the EM3 and wanted to get
the data thinking it might be helpful if it logs
> O2 data and Mixture Correction Table Address and current
mixture correction Data.
> Does anyone have Tracy???s Excel spreadsheet for the
logger?
>
> Cheers
>
> Steve Izett
>
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
Disclaimer
The
information contained in this communication from the sender is
confidential. It is intended solely for use by the recipient and
others authorized to receive it. If you are not the recipient,
you are hereby notified that any disclosure, copying,
distribution or taking action in relation of the contents of
this information is strictly prohibited and may be unlawful.
This email has been scanned for viruses and malware, and may
have been automatically archived by Mimecast Ltd, an
innovator in Software as a Service (SaaS) for business.
Providing a safer and more useful place for your
human generated data. Specializing in; Security, archiving and
compliance. To find out more Click Here.