|
|
Dave, Thanks for the feedback. I can see how that could be a problem! Fingers crossed that mine is an easier fix than that, but I will prepare for the worst. Thanks for taking the time! I will let you all know how it acts after we install the water pump, clean and bleed the system.
Kind Regards, Ryan
On Tuesday, June 2, 2020, 12:15:41 PM MDT, David Leonard wdleonard@gmail.com <flyrotary@lancaironline.net> wrote:
Hi Ryan,
I hope you dont have the same issue that I did. When I first got my engine running, I was using a "brand new" engine from Atkins rotary that had been sittiing around for several years both before and after I purchased it.
When I first got it running, the coolant would quickly overheat, while the radiator was not even warm to the touch. I fear you may have this issue because you said you plan to replace water pump and re-purge. These were also my initial steps.
Unfortunately, it turns out that during the idle years, the cast iron side housings' coolant passages had rusted solid preventing the circulation of coolant.
I had to tear down the engine and replace the side housings. I really hope this is not your issue, but if it is rest assured that it is not an impossible job. It is just a couple months of tinkering and a modest investment that dont amount to much in the long term.
Best, David Leonard Turbo Rotary RV-6 N4VY Bobby,
It appears to be only a water temperature problem. The oil stays in parameters. We are swapping the water pump and re-bleeding the system today.
Thanks Ryan Sent from my iPhone Ryan, We have a member of the group William Jepson that has some knowledge of the Powersport PSRU and PP engine. Bill post here from time to time. Are you coolant or oil cooling challenged? Bobby From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
Sent: Tuesday, June 02, 2020 9:20 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Hello From Utah My name is Ryan Hendrickson and I have an RV-8 running a Powersport firewall forward setup out here in Utah. I purchased the plane from the builder and a mentor of mine shortly before he went west. So unfortunately, I don't have the benefit of his knowledge to help me tinker on it. Finn has offered some guidance, but I thought it would helpful to find anyone else out there running the Powersport design. The motor runs very well, but I am struggling to keep it cool. If I succeed in solving the cooling issues, I would also love some advice on building an exhaust. It is currently straight-piped off the header and it is unbearably loud. That said, are there any Powersport aircraft out there that are successfully flying? Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here.
|
|