Mailing List flyrotary@lancaironline.net Message #65599
From: David Leonard wdleonard@gmail.com <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Shielded wires to fuel injectors?
Date: Sat, 14 Mar 2020 08:12:54 -0700
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
I used shielded twisted pair wires.  Not sure if it mattered.

Dave Leonard

On Sat, Mar 14, 2020, 7:49 AM Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
Has anyone used shielded wires to the fuel injectors?

As per Tracy's installation guide, the wires to the injectors should be
routed separately because they generate noise that could be induced into
any adjacent wires.

Would it make sense to run them shielded?

I may be installing a GPS antenna under the cowling.

Finn


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster